同軸電纜 co-axial cable (or concentric cable)
共軸轉動 co-axial drive
同軸輸送線(雷達) co-axial transmission line
旋塞 cock
軟木碰墊 cock fender
艉橋 cocking bridge
艏艉部上蹺變形 cocking-up
艉凹艙(小艇) cockpit
惰輪 cock wheel (or idle wheel , or idler)
椰皮墊 cocoa mat
椰子油 cocoa oil
椰皮墊 coco mat
龜裂開口位移 cod (= crack opening displacement)
化學需氧量 cod (= chemical oxygen demand)
柴油燃?xì)鉁u輪 codag (= combined diesel and/or gas turbine)
法規,代碼 )密碼 )章程 code
電碼簿 code book
信號旗 code flag
號碼代字 code letter
美國聯邦法規 code of federal regulations
柴油燃?xì)鉁u輪組合機 codog (= combined diesel on gas turbine)
系數 coefficient
收縮系數 coefficient of contration
動[力]黏度系數 coefficient of dynamic viscosity
膨脹系數 coefficient of expansion
肥瘦系數 coefficient of fineness (or fullness)
波動系數 coefficient of fluctuation
摩擦系數 coefficient of friction
熱對流系數 coefficient of heat convection
傳熱系數 coefficient of heat transmission
[運]動黏度系數 coefficient of kinematic viscosity
線膨脹系數 coefficient of linear expansion
性能系數 coefficient of performance
黏度系數 coefficient of viscosity
膨脹系數 coeffient of expansion
堰艙,圍堰 cofferdam
復合燃?xì)鉁u輪機 cogag (= combined gas turbine and/or gas turbine)
組合燃?xì)鉁u輪機 cogog (= combined gas turbine or gas turbine)
鑲齒輪 cog wheel
齒輪泵 cogwheel pump
凝聚 cohesion
盤管,線圈 coil
抗流線圈 choking coil
冷卻線圈 cooling coil
盤管鍋爐 coil boiler
盤管冷卻器 coiled pipe cooler
盤管熱交換器 coil heat exchanger
盤簧,螺旋彈簧 coil spring
棕墊 coir mat
棕索 coir rope
焦煤 coke
焦結煤 coking coal
空氣冷凍機 cold air refrigerating machine
冷彎試驗,常溫彎曲試驗 cold bending test
冷脆性 cold brittleness
冷破裂 cold cracking
冷拉管 cold drawn pipe (or tube)
冷拉管 cold drawn tube
冷溫濾油機 cold filter
冷溫折緣機 cold flanging machine
冷作成型 cold forming
耐冷試驗測定 cold resisting measure
冷鉚 cold riveting
冷軋鋼 cold rolled steel
冷脆性 cold shortness
冷溫起動 cold starting
低溫狀態 cold status
冷藏 cold storage
冷藏船 cold storage boat
冷藏庫 cold store (or refrigerating chamber)
冷水管 cold water pipe (cwp)
冷作 cold work (or working)
崩潰 collapse
可折小艇 collapsible boat
軸環,圈 collar
環領軸承 collar bearing
填補板 collar plate
推力環滾珠[軸]承 collar thrust ball bearing
環領止推軸承 collar thrust bearing
集流管 collecting pipe
集電環 collecting ring
集合器,集電器 collector
集流環 collector ring
[運]煤船 collier
防碰電達系統 collision avoidance radar system
防碰艙壁 collision bulkhead
塞漏氈,防水墊 collision mat
膠態燃料 colloidal fuel
柱廊 colonnade
色度表,顏色標度,色譜表 colour scale
色幕(有色玻璃) colour screen
測深色管 colour tube
柱 column
柱與棒錨聯合穩定型鉆油船 column and spud stabilized type drilling rig
柱穩定型鉆油船 column-stabilized type drilling rig
計算機輸出縮影片 com (= computer output microfilm)
碳油混合體 com (= coal oil mixture)
戰情中心 combat information center (cic)
多元散裝貨輪 combination bulk carrier
混載船 combination carrier
聯合控制,組合控制 combination control
組合加熱器 combination heater
組合機械 combination machinery
混式渦輪機 combination turbine
有根輪葉 combined blade
復合循環 combined cycle
柴油燃?xì)鉁u輪復合機 combined diesel and/or gas turbine (codag)
柴油燃?xì)鉁u輪組合機 combined diesel on gas turbine (codog)
合并效率 combined efficiency
復合燃?xì)鉁u輪機 combined gas turbine and/or gas turbine (cogag)
組合燃?xì)鉁u輪機 combined gas turbine or gas turbine (cogog)
組合沖動[式]渦輪機 combined impulse turbine
合成應力,組合應力 combined stress
復合渦輪機 combined turbine
復合閥 combined valve
混構系統 combine system
燃燒損失 combustible loss
可燃材料 combustible material
燃燒 combustion
完全燃燒 complete combustion
燃燒室 combustion chamber
燃燒爆震 combustion knock
燃燒壓力 combustion pressure
燃燒率 combustion rate
燃燒記錄器 combustion recorder
燃燒速率 combustion speed
燃燒沖程 combustion stroke
燃燒溫度 combustion temperature
燃燒器 combustor
確認試驗 comfirmation test
指揮管制中心 command control center (ccc)
指揮官,艦長,司令 commander
商船 commercial ship
共通臺座 common bed
共通污水管 common bilge piping
普通鏈環 common link
共通件 common piece
共通構件表 common piece table
普通滑動閥 common slide valve
通訊箱,旗箱 communication box
連絡管,通話筒 communication pipe
通訊管 communication tube
連通閥 communication valve
整流,換向 commutation
換向器,整流子 commutator
整流[式]馬達 commutator motor
升降口 companion
升降艙口 companion hatch
升降梯 companion ladder
升降口 companion way
比測儀 comparater
艙區,艙 compartment
艙間布置,艙區布置 compartmentation
羅經 compass
室內羅經 cabin compass
羅經校正 compass adjustment
羅經方位角 compass bearing
羅經盆 compass bowl
羅經臺 compass bridge
羅經面,羅經 compass card (or dial)
羅經航向 compass course
羅經甲板 compass deck
羅經面,羅盤 compass dial (or card)
羅經差 compass error
兩腳規,圓規 compasses
磁針,羅針 compass (or magnetic) needle
圓刨 compass plane
補償設施 compensating device
補整機構,均力裝置 compensating gear
室補償 compensating on chamber
補償線圈 compensating winding
補助,補償,補整 compensation
補整環,補強環 compensation ring
補償水柜 compensation tank
補償器,調整器 compensator
編譯器 compiler
配額,員額 complement
完全退火 complete annealing
完全燃燒 complete combustion
完全循環 complete cycle
全通甲板 complete deck
全通船艛甲板 complete superstructure deck
全通船艛船,輕[結]構船 complete superstructure vessel
完工檢查 complete survey
順應式平臺 compliant platform
順應式鉆油臺 compliant structures (or systems)
成分,構件 )分量 component
合成梁 composite beam
復合鍋爐 composite boiler
混合結構 composite construction
復合電焊條 composite electrode
混合接頭,機焊接合 composite joint
[木鐵]合構船 composite ship (or vessel )
熔劑(焊接) composition
化合物,劑 compound
復[合]裝甲 compound armour
復[合]梁 compound beam
復合周期引擎 compound (or dual, or mixed) cycle engine
復激發電機 compound dynamo
復式引擎 compound engine
復合規,漲縮表 )復合壓力計 compound gauge
復激發電機 compound generator
復合沖動[式]渦輪機 compound impulse turbine
復激馬達 compound motor
復式壓力計 compound pressure gauge
復合反動[式]渦輪 compound reaction turbine
復式蒸汽機 compound steam engine
復[合]應力 compound stress
復式渦輪機 compound turbine
壓縮空氣 compressed air
壓縮空氣引擎,氣動引擎 compressed air engine
壓縮空氣閥 compressed air valve
壓縮軟木 compressed cork
壓縮氧 compressed oxygen
可壓縮性 compressibility
壓縮缸 compressing cylinder
壓燃機 compressing ignition (or ci) engine
壓縮 compression
壓縮效率 compression efficiency
壓縮點火引擎 compression ignition engine
壓縮曲線 compression line (or curve)
壓縮[冷凍]機 compression machine (or compression refrigerating machine)
抗壓構件 compression member
壓縮壓力 compression pressure
壓縮程序,壓縮過程 compression process
壓縮比 compression ratio
壓縮應力 compression stress
壓縮沖程 compression stroke
壓縮溫度 compression temperature
壓縮試驗 compression test
壓縮負荷 compressive load
壓縮應變 compressive strain
抗壓強度 compressive strength
壓應力 compressive stress
壓縮機 compressor
制鏈器 chain cable compressor (or controller)
計算機輔助設計 computer-aided design (cad)
計算機輔助設計及制圖 computer-aided design and drafting (cadd)
計算機輔助工程 computer aided engineering (cae)
計算機輔助放樣 computer-aided lofting (cal)
計算機輔助制造 computer-aided manufacture (cam)
計算機輔助試驗 computer aided testing (cat)
計算機控制 computer control
計算機繪圖 computer graphics
計算機化 computerization
計算機網絡 computer network
計算機輸出縮影片,計算機輸出微軟片 computer output microfilm (com)
凹面填角焊接 concave fillet weld
凹透鏡 concave lens
隱藏?zé)?concealed light
暗線,隱藏布線 concealed wiring
集中負荷 concentrated load
濃差電位腐蝕 concentration cell corrosion
同心絞線 concentrically stranded conductor
同心電纜 concentric cable
同心圓 concentric circles
同心度 concentricity
概念設計,構想設計 concept design
混凝土包覆 concrete coating
混凝土重力式鉆油臺 concrete gravity platform
[鋼筋]混凝土船 concrete (or ferro cement ) ship
輔熱(焊接) concurrent heating
凝水泵 condensate pump
冷凝 condensation
冷凝設備 condensation plant
冷凝率 condensation rate
冷凝器,凝結器,復水器,電容器 condenser
逆流冷凝器 contraflow condenser
冷凝器泄壓閥 condenser relief valve
冷凝管 condenser tube
復水管套圈 condenser tube ferrule
凝汽機,附冷凝器[動力]機 condensing engine
冷凝設備 condensing plant
凝汽渦輪機 condensing turbine
船況,情況,狀態 condition
狀態曲線 condition curve
傳導 conduction
井口導管(鉆油臺) conduction pipe
傳導性,傳導度 conductivity
導體 conductor
槽,溝,管,導管 conduit
導管接合箱 conduit box
導[線]管套 conduit bushing
導[線]管接合匣 conduit connection box
導[線]管配件 conduit fittings
錐形離合器 cone clutch
圓錐規(軸,螺槳) cone gauge
圓錐部(艉軸) cone part
圓錐穿刺試驗 cone penetration test
塔輪 )錐形滑輪 cone pulley
錐形浮標 conical buoy
錐頭鉚釘 conical pointed rivet
錐形掃描 conical scanning
錐形閥 conical valve
錐形導槽 conic guide
連接整補 connected replenishment (onrep)
連接彎頭 connecting bend
接線箱 connecting (or connection ) box
連橋 connecting bridge
連接管 connecting pipe
連桿 connecting rod
連接套管 connecting sleeve
接線板 connection block
接線匣 connection box
接線圖 connection diagram
線端銜套 connection lug
司令塔 conning tower
殘余碳素 conradson carbon residue (ccr)
常數 constant
汽缸常數 cylinder constant
康[史登]銅線 constantan wire
定流電焊機 constant current welding machine
定能電焊機 constant energy welding machine
定高平臺型頂舉平底船型鉆探船 constant height platform type
定額損失 constant loss
定螺距 constant pitch
[徑向]等[螺]距螺槳 constant pitch propeller
等壓循環 constant pressure cycle
定壓閥 constant pressure valve
定額 constant rating
等反動率輪葉 constant reaction blade
常定點控制 constant setpoint control
定速調速器 constant-speed governor
定沖程噴油泵 constant-stroke injection pump
等溫循環 constant temperature cycle
[恒]定拉力絞車 constant tension winch
定壓電焊機 constant voltage welding machine
等容循環 constant volume cycle
拘束系數 constraint coefficient
構造,結構 construction
造船渠 construction basin
結構圖 construction plan
側面結構圖 construction profile
建造規范 construction (or detail) specification
消耗材 construction (or running) store
顧問工程師 consulting engineer
耗性導管電熱熔渣焊接法 consumable nozzle electroslag welding (ces )
消耗品 consumable store
消耗量 consumption
耗煤量 coal consumption
板條墊單面潛弧焊法 contact bar submerged arc welding (cbs)
正平衡裝置 contact dummy
接觸顎夾(焊接) contact jaw
觸點接通器 contact maker
貼模法 contact molding
貼模法(frp) contact mold method
接觸器 contactor
接觸電阻 contact resistance
接觸[片]段 contact segment
接觸應力 contact stress
接觸面 contact surface
容器,貨柜 )艙柜 container
貨柜駁船 container barge
貨柜導具 container guide fitting
箱裝法,貨柜化 containerization
貨柜吊架 container lifting spreader
貨柜船 container ship
貨柜吊卸梁 container spreader
容載系統 containment system
污染 contamination
臨時檢驗 contingent (or occasional) survey
強度連續性 continuity of strength
連續動作控制器 continuous acting controller
連續乙級天花板或內襯板 continuous "b" class ceiling or linings
連續撒氣,連續分供 continuous bleed
連續鑄造 continuous casting (cc)
連續控制 continuous control (cc)
直流電 continuous (or direct) current
連續[使]用 continuous duty
連續襯套 continuous liner
連續構材 continuous member
連續出力 continuous output
連續處理(計算機) continuous process
連續定額 continuous rating
連續掃描 continuous scanning
連續使用 continuous service
連續常用出力 continuous service output (cso)
額定連續常用出力 continuous service rating (csr)
連續玻璃氈 continuous strand mat
連續檢驗 continuous survey
連續波,等幅[電]波 continuous wave (cw)
連續焊接 continuous weld
[整補站]輪廓燈 contour light
等高線,輪廓線 )等值線 contour line
合約,契約 contract
合約設計 contract design
收縮 contraction
斷面縮率 contraction (or reduction ) of area
主機降額最大連續出力 contract mcr
承包商 contractor
簽約雙方 contract party
合約圖 contract plan
合約規范 contract specification
逆流冷凝器 contra-flow condenser
逆流熱交換器 contra-flow heat exchanger
逆流回?zé)崞?逆流式再生器 contra-flow regenerator
導葉(螺槳) contra propeller
對轉螺槳 contrarotating propeller
對轉螺槳 contra rotating propeller (crp)
導葉式舵 contra rudder
